Looking for the best darkroom equipment to get you set up for developing your own film, and for printing your own photographs? This guide will help you pick the best enlargers, best light for your darkroom, best film developing tank, and more – so that you can get started in with your home darkroom.
For the past 20 years we’ve discussed which equipment you needed to set up your own digital darkroom – or dry lab – with the benefits of being able to eschew the trays of smelly chemicals required in the ‘old days’ of film processing and wet labs, not to mention the trial and error.
Digital cameras were the new must-have, and in most cases existing film cameras (opens in new tab) were consigned to cupboards and drawers – or sold off cheaply on the second hand market.
However, everything that goes around comes around, and the joys of film usage and film processing are now being discovered by a new generation. At the same time, older enthusiasts, who first dabbled in darkrooms in their youth, are rediscovering the art and the fun of 35mm film (opens in new tab).
Whether you’re new to film photography or returning to it, the chances are you’ll be looking at setting up a whole new darkroom, so this guide is aimed at recommending what you’ll need to get started on that initial set up. Put simply, we’re seeking out the best darkroom equipment you can currently buy to help you get it right from the outset. After all, unlike with digital photography, there is no ‘undo’ or reset button to go back a stage if we mess up. Then again it’s hard to replicate the ‘magic’ of film and printing our own photographs.
So without further ado, let’s showcase what we consider the best darkroom equipment for both fledgling and established film users right now…
Best photographic enlargers
For those not already in the know, a photography enlarger is, as it sounds, a device for producing a photographic print larger than the original negative or transparency, done by projecting an image onto a piece of photographic paper. Thus an enlarger consists of a projection assembly mounted on a vertical column, that is itself mounted on a horizontal base.(opens in new tab)
While wanting a darkroom set up that contains everything you need as a photographer, you’ll undoubtedly desire something that is compact and lightweight with it. This jack-of-all trades option, aimed at both experienced users and beginners alike, includes everything the photographer needs to get enlarging. Included is an enlarger with a built-in white laminated baseboard for enlargements up to 8x10-inches, lamp, a 35mm negative/slide carrier and a pre-mounted 50mm Beslar lens to focus the light. A magnification scale is provided for quick and easy print sizing, while if you want bigger enlargements still, the reversible column allows for floor projection. Both comprehensive and flexible, peace of mind is provided by a year’s warranty.(opens in new tab)
If you need bigger enlargements of 35mm film negatives – here up to 11x14-inches for example, or larger still if reversing the provided column and projecting on the floor – then this enlarger with a counter-balanced elevation system from American brand Beseler could be serving of tabletop space in your home darkroom. As well as including a baseboard, 50mm lens and 35mm negative carrier, its internal filter holder allows for variable contrast or color printing filters. A focus knob can also be attached for either right or left handed use, as desired, while included accessories number a calibrated column elevation scale and a below-the-lens accessory holder. The advantage here is that all of the above is packed into a relatively compact footprint, thus suiting small darkrooms.
Best film developing tank
By ‘tank’ we are of course referring to the film developing variety, which usually come in stainless steel or plastic construction. While plastic tanks are fine for most developing purposes, there are some that argue that stainless steel reels will last a lot longer, so mix and match the two. If you’re starting out, however, you’ll undoubtedly get the best deal via a bundle offering both the tank and the reels, rather than buying separately. Whichever type of tank construction you choose – with personal preference often coming down to how easy they are to load – know that both are light trapped, meaning that film can be processed in normal room lighting, once it has been loaded in complete darkness.(opens in new tab)
What you see here is pretty much what you get. This is a value added bundle deal for anyone starting out self-processing their own film. It provides a durable, coated plastic developing tank with similarly plastic film reels from British film accessory specialist Paterson. The lightweight waterproof tank itself can hold two 35mm films, or a single roll of 120/220 medium-format film, with the tank delivering a light tight seal courtesy of the fact that it won’t lock if the seal is improper. Though purists may argue that steel constructed reels will endure for longer, peace of mind is nevertheless offered here via an exclusive lifetime replacement guarantee.
Best light for darkroom
You need a suitable safelight, with the correct filter and bulb, for use in your photographic darkroom if you are going to print your own black-and-white prints. This light provides illumination only from those parts of the visible spectrum to which the photographic printing material in use is insensitive. You can test that your darkroom light is up to scratch by placing a coin on the middle of a piece of photographic paper for five minutes before developing it; if there is no visual impression left on the paper, then your safelight is indeed safe. Note that these safelights are not safe for developing film or color printing.(opens in new tab)
Create just the right conditions and atmosphere for your home darkroom by ignoring the entreaties of Sting and, instead, putting on that red light. Another fantastic plastic accessory from film photography specialist Paterson, the set up includes a 15-watt lamp that's 4.5-inches in diameter and a red dome filter, which can be ceiling, wall or table mounted as desired. Designed for standard black and white printing, the safelight arrives ready to use with bulb, choice of dome cover – either the general purpose printing use red-orange dome, or a copper-brown alternative for variable contrast – plus a molded mains plug (suitable for either UK or US).
Best darkroom starter kits
If you’re looking to get started in processing film and creating prints at home, a starter kit is often the best value and moreover simplest way to get started. Fortunately, as this is still something of a niche yet growing pursuit, the choice is not massive, so here we pick out some of the recommended examples worth your further investigation.(opens in new tab)
Film specialist Paterson pops up in our round up again with its simple yet essential product offerings. The film-and-print bundle provides arguably everything you’ll need to get started from scratch – namely a development tank with two reels for loading film, three developing trays, darkroom thermometer, plus a safelight for processing black and white film. Yes, all these accessories are available separately, and you could build up ownership gradually, but why do that when we can save ourselves money and grab all the film processing and developing must-haves needed in one convenient value-added package?
A simpler version of the kit, with just the film processing equipment, is also sold in some stores. As it is, you might want to add your own daylight-changing bag and enlarger to this set up as well as developing chemicals, obviously, if they’re not included in your deal due to the territory you’re purchasing it in, but pretty much everything else is here.
Best darkroom thermometer
If you’re serious about black and white or color processing then, because of the direct correlation between temperature and processing time, seek out the indispensable addition of a thermometer with an easily readable scale or gauge. Accuracy and reliability is key here, which is why you’ll want one that works.(opens in new tab)
Looking like something you might stick in a joint of roasting meat to check that it’s cooked in the middle, this thermometer for photographers features a gauge on the end of a metal rod that is 20cm in length.
Manufactured from stainless steel and weighing just 38g overall, this gauge for checking and adjusting temperature for home processing 35mm film is waterproof, while the overall structure is resistant to corrosion from the chemicals in processing fluid. Measuring range is 0 to 70°C. A clip is provided so the thermometer can be clipped to the rim of the measuring cup it’s being dipped in, or fixed to a desktop to stop it rolling around when not in use. Thankfully the position of the actual clip is adjustable, to fit different measuring cup heights. Conveniently requiring no batteries, this is a straightforward and inexpensive addition to any fledgling home darkroom set up.
Best darkroom timer
They say timing is everything – and when it comes to film processing they’d be right. Therefore you’ll want to seek out an accurate and reliable timer. You could use your watch or smartphone - but you may not want to leave these around when using chemicals and water in a dark room. Luckily there are specialist tools available for the home darkroom that are, whether available separately or equally as part of a bundle deal, just the job.(opens in new tab)
A darkroom timer is another essential bit of kit as it lets us accurately time our developing process – for example timing the duration for which an image is projected onto paper to control the exposure of our print, as one would do automatically via adjusting shutter speed when using a camera. This convenient timer can be used handheld, propped up on a desktop or stuck to a magnetic surface thanks to a magnet in the back. If required as a prompt for creative types, there is a built-in alarm too that is triggered when the device reaches an allotted time. It also has three different channels that can be started independently or simultaneously and correspond to hours, minutes and second. Plastic in build it is relatively inexpensive with it.
Best processing chemicals
It used to be said that digital photography was great because it set us free from the need for chemicals in our home darkroom – but some photographers have obviously felt a certain chemistry was missing. Fortunately long established brands including brands such as Ilford are still producing photo chemicals to meet this new wave of interest. Serious darkroom photographers will have their favorite developers - and will buy additional chemicals such as fixer and stop bath separately, but a great first option is to try an all-in-one kit…(opens in new tab)
If you haven’t had a set of chemicals included as part of a general starter kit bundle deal, then of course they can be bought separately – and of course will need to be for subsequent use. This starter pack from industry stalwart Ilford for black and white film development contains single use sachets of each photo chemical with pre-measured solutions to develop two rolls of 35mm film or one roll of 120 film, so that all the newcomer needs do is just add water. Included here are sachets of film developer (60ml), film stop bath (30ml), film fixer (100ml) and film wetting agent (25ml) to get users up and running.
Best developing trays
This item for inclusion in any home darkroom set up is pretty much as straightforward and obvious as it sounds. Photographic print trays have a recess to allow the chemicals to evenly come into contact with the print, while allowing the print itself to be moved around and avoiding it sticking to the bottom of the tray. They are also often color coded, so the photographer can monitor which differing chemical is being used in each tray. They can be bought separately, but can be found sold in sets of three - for developer, stop bath and fixer.(opens in new tab)
Here we have a set of three colorful plastic constructed developing trays available in a variety of sizes, for, variously, 5x7-inch paper, 8x10-inch paper, 12x6-inch paper and 16x20-inch paper. Obviously the plastic used is claimed to be impervious to possible corrosion from the chemicals in use, with three colors of tray offered in each set to allow for photographers to differentiate between them when under safelight conditions. The tray design allows for economy in terms of the amount of solution used, while allowing for the easy removal of prints with it. The stackable design also allows for convenient space saving storage when the trays are not in use.
Best print tongs(opens in new tab)
To avoid getting the chemistry on your hands, a set of tongs is a sensible (but ultimately not essential) accompaniment to your three photo printing trays. This set of three are colored to match Paterson's own trays. Shaped shoulders allow you to prop the on the tray rims, so they don't submerge into the solutions.
Best contact printer
A contact print is a useful first step after developing your negatives. It gives you a positive image of each of the frames on the roll on one sheet of printing paper. A contact print gives you a better view for picking the best images to print up big - and also acts as index print for the roll of film. Paterson makes four versions of its contact printer - which each has a baseboard with a hinged plate of glass, that sandwiches the negatives with the printing paper, keeping them in position and flat. The most popular model is the PTP619 which proofs a complete 36-exposure roll of 35mm film, cut into strips, onto a standard piece of 8 x 10in photographic paper. Other models allow you to print onto 12x10in paper, and to contact print medium format and large format film.
Best storage bottle
Once you’ve mixed up your photo chemicals you may want a method of storing them that’s safe and reliable whilst preserving the integrity and effectiveness of said chemicals. Enter the photographic storage bottle, available from various photo specialists.(opens in new tab)
Featuring a snazzy accordion style design that can be gently squeezed in a bid to expel and remove excess air, plus a screw on cap to prevent possible oxidization of the contents, this is Kaiser’s solution for storing photo chemicals in volumes from 550ml up to 1000ml, while extending their storage life into the bargain. Providing peace of mind for those looking to stash developing fluid, this bottle comes via a limited one-year warranty. It’s a practical and very affordable solution to avoid wasting potentially expensive fluids, while being lightweight and easily stored with it. Just make sure to stash it out of reach of young children! A larger 900-2000ml version is also available.
Best film clips
Film clips are a useful, if not essential accessory when developing film. They allow the developed, fixed and washed roll of film to hang vertically without the risk of the emulsion curling as it dries. These Paterson clips have been around for decades, and are sold in pairs with the weighted one of the two placed at the bottom. A pair of pin-like teeth bite into the emulsion, so that they can not fall off.
Best changing bag(opens in new tab)
Although you can develop film in daylight, once you have go into the processing tank - you need to load the film onto the spool, and into the tank in darkness. A changing bag, therefore, is an essential bit of kit if you don't have a room where you can't achieve complete blackout. This large bag is plenty big enough to incorporate a standard film development tank – with a zippered opening that allows you to get the tank components, the reel, film, and film opener in for the delicate loading procedure. The bag is also necessary if you want to buy film in bulk and load your own 35mm canisters.
• Best film cameras (opens in new tab)
• The best cameras for beginners (opens in new tab)
• The best disposable cameras (opens in new tab)
• The best Lomography cameras (opens in new tab)
• Best lightbox for photographers and artists (opens in new tab)
• Best slide viewers (opens in new tab)